- The raceway of housing washer of this bearing type is spherical with the center of the radius located on the bearing axis. The design provides self-alignment capability to the bearing. The contact angle (α) is approximately 45° enabling the bearing to support axial load and a small to moderate amount of radial load.
- This bearing type is often used for injection molding machines, crane hooks and other large machines.
- Large load
- Low raising temperature at high-speeds
- Low noise
- Operating temperature (up to 150°C)
Attention
- Compared to other bearings, Spherical Roller Thrust Bearings should be oil lubricated because it is relatively difficult to spread the lubrication grease between roller end and the flange as well as retainer and washer.
- This bearing type is often used for injection molding machines, crane hooks and other large machines.
Injection molding machine | Horizontal-axis turbine |
- Spherical Roller Thrust Bearings
Bore Diameter 60 - 530mm
Follow